Tel: 0808 123 1214 Mob: 07780808282 Mob:07761167885
PEBBLEDASH CLEANING ABERDEEN
Fully biodegradable
Does not bio-accumulate
Ph neutral, so safe for materials and gentle on people
Controls algae, lichen, fungi, moss and mould
Safe for children and pets once treated surface is
completely dry
Non-bleaching (contain no bleach or acids)
Harmless to all known building materials
Can be used as a pre-painting primer to kill algae and
mould spores
Soaks deep into porous surfaces – killing the micro-
organisms responsible for unsightly discolouring, and
potential structural damage
The application of a Softwash
Solution via a very low pressure
nozzle and pump. The Softwash
solution is sprayed onto the wall or in
some instances it is brushed on.
System 1: The hypochlorite solution is
sprayed onto the wall and then left for
30-60 minutes before being rinsed of.
It may require more than 1 treatment
to bring the walls up to an acceptable
standard. The final step of the process
is to treat the wall with the inhibitor
solution. Results are normally seen
within 72 hours of application.
System 2: The application of a
(DDAC) solution. The wall is saturated
with the solution which is not rinsed
off but just left to dry. This system can
take up to 1 year to fully clean but
some noticeable difference should be
seen within a few months.
Pressure Washing at a high pressure is not recommended to clean Pebbledash walls as the force of the jet will dislodge the dash.
Softwashing is the preferred method for the cleaning of Pebble Dash and Roughcast this non-invasive system uses chemicals to remove the staining rather than
force.
Cleaning & Treating the biofilm with a Softwash System
System Application How to clean Render Walls
2) A Biocidal Wash (DDAC) fully biodegradable does not bio-accumulate Ph neutral, so safe for children and pets once treated surface is completely
dry.
Cleans – Sanitises – Disinfects
The products active ingredient is recommended for the
cleaning of – render and cladding – of industry-
leading companies such as K Rend, Weber and
Kingspan Cladding.
Effective and safe to use on:
o
Coloured and plain wall render
o
Concrete patios & paths
o
Painted surfaces
o
Timber decking
o
Natural stone, including sandstone and granite
1) A hypochlorite based softwash biocide which at 5:1-10:1 dilution is classed by the EU, PCD and HSE as non corrosive or hazardous to people or the environment.
This solution contains no acids or solvents does not bio-accumulate and the surfactant is fully biodegradable and after use it quickly breaks down into tiny amounts of
ordinary salt and water
Pebbledash is common decorative finish on many exterior house walls. The dash over time captures small dirt particles this allows bacterial growth to establish which
appears as red, green or black staining. This staining is more obvious on the walls that take the brunt of the weather but can be on all walls. The biofilm staining can
be removed from the wall using our Softwash systems.
Before
After
Before
After
Results can take up to 1 year to cleanse the wall
The render can be treated using our professional softwash products which are fully approved by both the Irish Pesticides Registration & Control Service (PCS) and
UK Health & Safety Executive (HSE) for use as a softwashing biocide in Ireland and the UK also it's fully compliant with the EU "REACH" (Registration, Evaluation,
Authorisation & restriction of Chemicals) regulations for cleaning exterior hard surfaces.
This professional grade product can give outstanding results as can be seen in the photos. A safe and effect method to return your property to that new look again.
We are an experienced Softwash applicator with all the professional up to date equipment to give a quality finish every time.
Pebbledash Cleaning Aberdeen
COMMERCIAL - DOMESTIC
EXTERIOR CLEANING CONTRACTOR
Pebble Dash Cleaning (results can be achieved the same day for some works)
Remaining staining will disappear within 72hours
Pebbledash Treatment 8am
before start of works
Same Day Results on this Pebbledash Property
Softwash Biocide
Cleans – Sanitises – Disinfects
This powerful softwash biocide rapidly removes black, red, green and yellow staining – caused by algae, lichen, fungi, moss and mould – from render The
Softwash Biocide is fully government approved sodium hypochlorite based softwash biocide available in the UK & Ireland. Contains no acids or solvents Safe for
humans and materials. Safe for our environment
11.05am after works completed
(only 1 wall) and the wall will
continue to improve over the next
few days/weeks
Aberdeen Pebbledash Cleaning provided by Cotec transform dirty looking render back to
looking like new again No pressure safe Softwashing for biofilm render stains